Pro Package Setup

Phase 1 - Press box

1. Place the GameStrat Router near your laptop and connect it to power. Run the black Ethernet cable from the router to the laptop. Open GameStrat on the laptop and confirm the network indicator in the top left of the app reads "Ethernet, IP Valid."
2. Mount the GameStrat WiFi Antenna at the press box window facing the sideline iPads. Connect the red cable from the power box to the antenna, then run the blue cable from the antenna power box to the GameStrat Router port labelled “GameStrat WiFi”. A solid blue light on the front of the antenna confirms it is on and connected to the GameStrat Network.
3. In the camera settings, set the camera output to 1080p HDMI, then run the HDMI cable from the camera to the GameStrat Capture Device. Connect the Capture Device to a USB 3.0 port on the laptop. Confirm the camera feed is visible in GameStrat before heading to the end zone.

Phase 2 - Testing

1. On the laptop, start a live game. Confirm the camera feed is active and visible in GameStrat.
2. Connect iPads to the GameStrat WiFi. Any iPads used in the press box must be in the same room as the GameStrat WiFi Antenna and within 15 feet. The antenna must have a clear line of sight to the sideline iPads.
3. Record a 10–15 second test clip, then open it on all iPads to confirm smooth playback before kickoff.

Pre-kickoff checklist

• All iPads are connected with a check mark
• GameStrat WiFi Antenna shows a solid blue light
• Test clips played back on all iPads
• All cables are secured, and the laptop is connected to power

Hardware Manual

If you have any questions about setting up your hardware, please call us at 1-800-783-1968 x1 so we can assist you directly.