Skip to content
English
  • There are no suggestions because the search field is empty.

Premium Package Setup

From start to finish, a guide to setting up your Premium Package in under 20 minutes

Phase 1 — Press box

  1. Place the GameStrat Router near your laptop and connect it to power. Run the black Ethernet cable from the router to the laptop. Open GameStrat on the laptop and confirm the network indicator in the top left of the app reads "Ethernet, IP Valid." (LINK - CANT UNTIL PUBLISH)
  2. Mount the GameStrat Bridge at the press box window facing the end zone. The label on the device reads "Face to End Zone." Connect the grey cable from the Bridge to the Bridge port on the GameStrat Router. There will only be 2 lights on the Bridge until your end zone setup is complete. Once the end zone is set up, the Bridge will have 6 lights.
  3. Place the Press Box WiFi Antenna in an elevated position in the same room as the press box iPads. Connect the red cable from the antenna to the GameStrat Router. Confirm a solid blue light appears on the side of the antenna.
  4. In the camera settings, set the camera output to 1080p HDMI, then run the HDMI cable from the camera to the GameStrat Capture Device. Connect the Capture Device to a USB 3.0 port on the laptop. Confirm the camera feed is visible in GameStrat before heading to the end zone.

Phase 2 — End zone

  1. Mount the GameStrat Station in an elevated position behind the end zone with a clear view of the press box. The label reads "Face to Press Box." Connect the grey cable from the power box to the Station. Once the full connection is established, the Station should show 7 blue lights.
  2. Run the black Ethernet cable from the GameStrat Station to the GameStrat Streaming Device Ethernet port, then plug the device into power. A solid blue Ethernet icon (3 squares) on the Streaming Device indicates a network connection.
  3. Mount the GameStrat Sideline WiFi Antenna in an elevated position and aimed toward the sideline iPad area. Connect the red cable from the power box to the antenna, then run the blue cable from the antenna power box to the GameStrat Station Power Box. A solid blue light on the front of the antenna confirms it is on and connected to the GameStrat Network.
  4. Set the camera output to 1080p HDMI and connect it to the HDMI In port on the GameStrat Streaming Device. A solid blue HDMI feed icon (circle) on the Streaming Device indicates camera signal feed detection. Then return to the press box and confirm the GameStrat Bridge is also showing 6 blue lights.

Phase 3 — Testing

  1. Return to the laptop and start a live game. Confirm both the press box and end zone camera feeds are active and visible in GameStrat.
  2. Connect iPads by location. Press box iPads join the Press Box WiFi. Sideline iPads join the Sideline WiFi. Each iPad should show a checkmark in the top-right corner of the GameStrat app.
  3. Record a 10–15 second test clip from both angles, then open it on all iPads to confirm smooth playback before kickoff.

Pre-kickoff checklist

  • GameStrat Bridge: 6 lights | GameStrat Station: 7 lights | Press Box WiFi Antenna: solid blue | Sideline WiFi Antenna: solid blue
  • GameStrat Streaming Device: ethernet icon solid, HDMI icon solid blue
  • Both camera feeds are active on the laptop
  • All iPads are connected with a check mark
  • Test clips played back from both angles on all iPads

Hardware Manual

If you have any questions about your hardware setup, please call us at 1-800-783-1968 x1 so we can assist you directly.